国军标GJB9001B-2009质量管理体系简介
GJB GJB9001B-2009 quality management system
GJB9001A-2001质量管理体系标准（以下简称GJB9001A）是由中国人民解放军总装备部在90年代未牵头组织总参通讯部、海军、空军、二炮等装备部，新时代认证中心、理工大学、航天七0八所、三0一所、二0三所、核工业标准化所等部门，在等同采用GB/T19001-2000的基础上，根据军工产品的特殊要求修订成的。为了便于识别，对增加的特殊要求的楷体字表示。
The GJB9001A-2001 quality management system standards ( hereinafter referred to as GJB9001A ) by the Chinese people's Liberation Army General Armaments Department in 90 time not to lead the General Staff Department of communications, naval and air forces, the second artillery and other equipment, a new era of attestation center, University of science and technology, space seven, 0 eight, 0 three, two San0yi Institute, nuclear industry standard the Department, in identical adoption of GB / T19001-2000 based on military products, according to the special requirements of the revised into. For ease of identification, to increase the special requirements of the italicized words said.
本标准对承担军用产品、研制、生产、试验和维修任务的组织是必须执行的质量管理标准，并可做为对体系进行评定的依据。
This standard to undertake military products, development, production, test and repair task organization is required to implement the quality management standard, and can be used as the basis for system evaluation.
一、本标准相对于GB/T19001-2008增加的主要内容
One, the standard GB / T19001-2008 increased relative to the main content
1、针对产品的关键和重要特性和过程，鉴定和批次管理，增加了8个术语；
In 1, the product key and important characteristics and process, identification and batch management, an increase of 8 terms;
2、针对产品的
In 2, the products of
a.接受顾客（军方）的监督，强化产品可追溯性；
A. Accept customer ( military ) supervision, strengthen product traceability;
b.文件记录控制；
B file recording control;
c.最高领导的责任和质量相关人员的定期培训持证上岗；
C. The highest leadership responsibility and quality related personnel of regular training;
d.信息的收集、贮存、传递和处理；
D. Information collection, storage, transmission and processing;
e.对复杂产品实现各阶段的风险分析和评估；
E. For complex products in every phase of the risk analysis and assessment;
f.对产品的设计和开发的应满足的若干要求；
F. The design and development of product should meet certain requirements;
g.与顾客有关要求的变更，设计的评审、验证和确认要有顾客参加并争得同意；
G and customer requirements change, design review, verification and validation have participated and won customers agree;
h.新产品的试制、试验的若干要求；
H. The trial-manufacture of new products, test a number of requirements;
i.采购新设计和开发的产品控制要求；
I. Buy new design and development of product control requirements;
j.对产品和服务提供的控制新增5项要求；
J. The control of production and service provision to add 5 requirements;
k.对产品批次管理新增3项要求；
K. The product batch management add 3 requirements;
l.对关键过程交付后活动和技术状态管理的识别控制；
L. Key process post delivery activities and technology status management identification control;
m.对产品的监视、测量和不合格的控制增加若干要求。
M. The product monitoring, measurement and Unqualified control to increase the number of requirements.
二、GJB9001B-2009新增部分的侧重点
In two, GJB9001B-2009 part of the new focus
a.更强调以顾客为核心，产品设计、开发、质量控制要求的变更、质量故障、纠正预防等都要通知顾客，并请参予和争得同意；
A. More stressed that take the customer as the core, product design, development, quality control, quality change of fault, corrective must inform customer, please participate and gain consent;
b.更重视设计和开发的全过程；
B. More attention to the design and development of the whole process;
c.更强调了信息的收集、分析、沟通、处理的重要性，强化软件在产品生产中的作用；
C. More emphasis on the information collection, analysis, communication, processing of the importance, strengthen the software in the production of;
d.突出和强调地产品的关键特性、关键件和生产实现阶段中关键过程和特殊过程的识别和控制；
D. Highlight and emphasize key product characteristics, key parts and production stage of implementation of key process and special process identification and control;
e.更强调产品的记录、操作和内容的可追溯性及一致性。
E. More emphasis on product records, operation and the content of the traceability and consistency.
三、建立和实施GJB9001A要结合GJB的十大技术管理标准要求即：
Three, the establishment and implementation of GJB9001A combined with GJB ten technology management standards require that:
1、GJB2993-1997 武器装备研制项目管理
In 1, GJB2993-1997 weapon equipment development project management
2、GJB3206-1998 技术状态管理
In 2, GJB3206-1998 technology status management
3、GJB450A-2004 装备可靠性工作通用要求
In 3, GJB450A-2004 equipment reliability requirements
4、GJB368A-1994 装备维修性通用大纲
In 4, GJB368A-1994 maintainability general outline
5、GJB3872-1999 装备综合保障通用大纲
In 5, GJB3872-1999 equipment integrated support general outline
6、GJB 900-1990  系统安全性通用大纲
In 6, GJB 900-1990 system security general outline
7、GJB 841-1990  故障报告、分析和纠正措施系统
In 7, GJB 841-1990 failure reporting, analysis and corrective action system
8、GJB2786-1996  武器系统软件开发
In 8, GJB2786-1996 weapon system software development
9、GB/T19022-2003/ISO 10012：2003
In 9, GB / T19022-2003 / ISO 10012: 2003
测量管理体系  测量过程和测量设备的要求
Measurement management systems - Requirements for measurement processes and measuring equipment
10、GJB1391-1992  故障模式、影响及危害性分析程序
In 10, GJB1391-1992 failure mode, effects and criticality analysis program
四、关于GJB9001A第三方评定的若干问题
Four, on the GJB9001A third party assessment problems
1、总装备部认可的认证评定机构主要有：新时代认证中心、广东赛宝等几家军工系统的认证机构；
In 1, the General Armament Department accredited certification rating agencies are: new era, Guangdong CEPREI Certification Center and several military system certification body;
2、证书有效期、监审和复评有效期4年，发证后每隔7+2个月监审一次，到期前6个月进行综合评议
2, the term of validity of the certificate, supervision and assessment is valid for 4 years, every month 7+2 certification examination and a, 6 months before the expiration of a comprehensive review
3、认证收费标准同GB/T19001，具体审核人.日数见附表
In 3, certification fees with GB / T19001, the specific audit days schedule.
（注：申请GJB9001A认证的组织应注意:认证机构对审核人.日数和现场审核质量控制较严,这点和GB/T19001审核是有较大区别的.)
( Note: apply for GJB9001A certification organizations should pay attention to: the certification institution to audit. The on-site audit days and more stringent quality control, and that GB / T19001 audit is different from. )
五、选择前期认证咨询应注意的问题
Five, select previous certification consultation should pay attention to the problem
1、要选择成立时间较长，有国家批准咨询资质和建立有严格保证咨询质量和服务控制程序的咨询机构；
1, to set up a long time, the state has approved the Advisory qualification and the establishment of a strict quality assurance consulting and service control program advisory body;
2、要严格考查拟开展咨询老师的简历和能力
2, strict check to carry out the consultation teacher resume and ability
a. 有较长期在军工企业从事质量管理的工作经验，并担任过质量负责人（应10年以上）
A. Has a long-term engaged in war industry enterprise quality management experience, and served as the person in charge of quality ( 10 years )
b. 一般应具有大本以上学历；
B. Should have bachelor degree or above;
c. 拥有国家QMS注册咨询师资格，并有较丰富的认证咨询工作咨询经验，应咨询企业有15家以上。
C has a national QMS certified consultant qualification, and have rich certification advisory work experience, there are more than 15 should be consulting enterprises.
我公司和军工系统有广泛的联系，拥有强大的精熟GJB9001的人力资源库。欢迎有GJB9001A认证要求的机构组织同我们合作。
My company and the military system has extensive contacts, has a strong y GJB9001 pool of human resources. Welcome to have GJB9001A certification organizations to cooperate with us.

[ 关闭本页 ]